How to Root MyPhone Infinity Lite running Kitkat

Start the tweak with Infinity Lite

For those who owned a Lite version of "True Octa-Core" MyPhone Infinity, this is a good start to get your android smartphone one step ahead of others.

As a brief information about what does rooting can do to your beloved Infinity Lite, well, gaining root access allows your android phone to maximize the customization and optimization capability.
With that fact, it is near possible to turn your device an android phone that you ever wanted to be, but, taking a little bit of risks.

Worry less because this article will give you a well-cooked and fed instruction, guide, whatever, on how to successfully root your MyPhone Infinity Lite and make it highly customizable.

How to Root MyPhone Infinity Lite running Android 4.4.2 KitKat

Disclaimer: We, the MyPhone Infinity Lite Official Group and theAndroidHow, are not liable for any damage, defect, loss of data, etc, that may possibly occur on your device. You are the one to decide whether to root your device or not. We are just here to help.

You must have:

• PC/Laptop running Windows XP or higher
• MyPhone Infinity Lite in hand
• USB Cable connector to connect your android smartphone to your PC/Laptop
• Download the apps/software needed (Links can be found at the bottom of this post)
• Rooting Knowledge - visit this link to know more

Steps:

1. Install Windows driver in your computer

2. Install vRoot in your computer

3. From your smartphone, go to Setting > Developer options > check USB debugging

4. Now, connect your Infinity Lite to your computer using USB cable

5. Now, open vRoot (right-click and run as administrator)

6. Wait for your smartphone to be detected

7. Click ROOT

Wait for the rooting process to be done and that's it! You have successfully gained root access to your MyPhone Infinity Lite. Verify if your android smartphone has gained root access completely by downloading Root Checker app from Google Play Store.

Big thanks to MyPhone Infinity Lite Official Group for allowing me to deliver this info to you.

Downloads:

Download vRoot Download Windows driver

How To Root MyPhone Rio Craze in 6 Steps

Myphone Rio brings pinoy crown an android craze

MyPhone continues its way on releasing budget smartphones to bring the mass the new Android Kitkat experience. How could Pinoy take this offer for granted?

Unbox MyPhone Rio Craze, the root way

The new MyPhone is built with an unusual chipset from which it was mainly the reason why it differs from the method of rooting we usually do from its recent Rio series. This time, let me present the rooting exploit that actually worked on my friend's budget-friendly Kitkat android smartphone, MyPhone Rio Craze, that might worked to yours as well.

Guide to Root MyPhone Rio Craze running Android 4.4 Kitkat

Hereinafter this guide, it may help you to successfully gain root access to your MyPhone Rio Craze. Just make sure to carefully read the instructions before trying to do something.

Disclaimer: Do this at your own risk. You are solely responsible for the changes you'll be making to your device. I am just here to share.

Don't forget to know what is rooting and its pros and cons.
It is always best to have your smartphone back-upped. Try to secure your important files, contacts, messages. Visit this link to know more how to backup your smartphone.

Steps:

1. Install PdaNet and VRoot to your computer. (Download links are found at the bottom of this guide.)

2. From your MP Rio Craze, go to Settings > Developer options > enable USB Debugging.

3. Connect your smartphone to your computer using USB cable.

4. Wait for your device to be detected by your computer.

5. From your computer, right-click VRoot app and run it as administrator, accept and press the Root button (green button).

6. Wait for the confirmation if your smartphone was successfully rooted and that's it!


After rooting, your phone may reboot itself so don't worry about it. Check if your phone has complete root access by using Root Checker app available from Google Play Store.

Credits to the Developers of the apps used.

Download links:

PdaNet - Mirror     VRoot - Mirror

5 Steps To Root Asus Zenfone 5

Unleash the monster within your Asus Zenfone 5

Asus Zenfone 5 itself is a beast in terms of display architecture popped with a Intel Atom Z2560 chipset paired with 2GB amount of RAM. That's far enough undeniably takes the lead smartphone on its price range.

But the amazement is not yet over for those who seeks for greater power and feature because finally, developers granted root exploit to this smartphone allowing it for further tweak-abilities and release the monster that resides.

Rooting Asus Zenfone 5

Proceeding to this article will further take you to the 5 step guide on how to easily root Asus Zenfone 5. But before anything else, I would recommend you to understand the pros and cons of rooting. Now if you are ready, it is time to take the next part.

The 5 Step Guide To Root Asus Zenfone 5

Disclaimer: Do this at your own risk. We are not responsible for any changes made from following this guide. Furthermore, rooting may void warranty. Root wisely.

Things needed:
Asus Zenfone 5
Zenfone Root APK

Steps:

1. Download the Zenfone Root APK from a computer and put it to your phone's SD card. (You need USB cable to connect your Zenfone 5 to your computer.).

2. Once the Zenfone Root APK is already on your SD card. Go to Menu > Settings > Security on your Zenfone 5 and enable Unknown sources selection.

3. Now, open any file manager/explorer on your device then locate Zenfone Root APK, tap it to install.

4. After installing, open the newly installed app. Select SuperSU (by Chainfire) then hit OK I know, please root!.

5. Wait for the app to successfully root your device. Once done, download Root Checker on Google Play Store to confirm if the rooting is completely exploited.

8 Easy Steps To Root Lenovo A850

Lenovo's very own A850 has been one of the top selling android smartphone due to its cool looks, great performance and a very affordable price. Anyone has eyes on this smartphone will think of buying it.

Unleashing Lenovo A850? root it!

For those who have it and willing to extract its full potential, as an android smartphone, it is always a good option to root it and apply some performance tweaks on it. With that, this article is made to give Lenovo A850 users like you, the opportunity to root your phone.

8 Easy Steps to Root Lenovo A850

Performing the following easy guides below, you will finally achieve a rooted Lenovo A850 in no time without even using a computer. Thanks to XDA member alephzain for creating Framaroot. Without much anything, here's how to root Lenovo A850 in a very easy way.

1. From your Lenovo A850, go to Settings, open Security and enable Unknown Sources by checking it.

2. Still from Settings, find and open Developer options and enable USB debugging. If you were unable to find Developer options on your Settings, go to About phone and tap Build number few times until "Developer mode has been enabled" message appears.

3. Now, download the Framaroot android app and put it on your phone's micro-SD card.

4. Using any file browser/manager, find the Framaroot app, tap on it and select Install.

5. After installing the app, Choose Open. (The framaroot app can be found on your app drawer.)

6. Select Install SuperSU then further choose Boromir. From there, Framaroot will try to root your phone so just wait a few seconds.

7. Now its rooted. :)

8. Double check if there's SuperSU app on your app drawer and verify if you have successfully rooted your Lenovo A850 by using Root Checker free app on Play Store.

Enjoy!

Downloads:

• Framaroot app

Guide: Carliv Touch Custom Recovery For MyPhone Ocean Lite

Got a working custom recovery on MyPhone Ocean Lite?

It's been a tough week for me that I haven't made much update with my blog as I was busy programming a system. Going back, have you got custom recovery working on your MyPhone Ocean Lite android smartphone? If not yet, you are lucky to get bumped on this webpage.

Here's CWM-based custom touch recovery for you

For those who are not aware of what type of device you have, Ocean Lite's has a different kind of file system from which the actual Clockworkmod custom recovery do not support officially. That took android developers a hard time to get CWM recovery ported to this kind of Mediatek device. Fortunately, with the work of the great Carliv, thus, made this problem solved amazingly.

How To Flash Carliv Touch Recovery on MyPhone Ocean Lite?

Following this guide, finally, you will be able to install Clockworkmod-based recovery on your MyPhone Ocean Lite. After this, you can flash any flashable mods as much as you want just like using CWM. If you're, it's time to start the flashing. Don't forget to thank Mr. Siong for this contribution bringing Carliv Touch Recovery to Ocean Lite device.

Disclaimer: Flash at your own risk. We are not responsible for any bricked device and anything bad it may cause.

For MTK MobileUncle Tools

Instructions: (Before anything else, PLEASE MAKE A BACKUP)

1. Put the myphone_ocean_lite_ctr.img to your SD Card.
2. Install MTK_Mobile_Uncle_Tools_2.9.5.apk.
3. Open/run MTK Mobile Uncle Tools.
4. Go to Recovery Update.
5. Then select myphone_ocean_lite_ctr.img.
6. There will be pop ups, just choose Yes.

Note: If myphone_ocean_lite_ctr.img doesn't show on Recovery Update, rename it to "recovery", it should be like "recovery.img". If doesn't work, try Rashr - Flash Tool instead of Mobile Uncle Tools.

For Rashr - Flash Tool

Instructions: (Before anything else, PLEASE MAKE A BACKUP)
1. Put the myphone_agua_hail_cwm.img to your SD Card.
2. Install Rashr.apk
3. Open/run Rashr - Flash Tool
4. Press Flash Recovery
5. Then select myphone_ocean_lite_ctr.img.
6. There will be pop ups, just choose the positive buttons xD (Yes, yes).
Note: If myphone_ocean_lite_ctr.img doesn't show on Recovery Update, rename it to "recovery", it should be like "recovery.img". If doesn't work, try the instruction for MTK MobileUncle Tools.

Credits to contributor Siong.

Requirements and Downloads:

• Rooted Phone - If not, please go here
• MTK MobileUncle Tools
• Carliv Touch Recovery for Ocean Lite
• Rashr - Flash Tool
• ClockworkMod

Flash CWM on Cherry Mobile Omega Spectrum running Kitkat

Finding out ways how to get Clockworkmod Recovery (CWM) installed on your Cherry Mobile Omega Spectrum? Grab the opportunity to finally embed it to your smartphone. Thanks to Eyman Aguilar's share on this blog's comment area, we have now the chance to experience the most popular custom recovery on Omega Spectrum running the latest android version, Kitkat.


NOTE: This is only applicable on Omega Spectrum running Kitkat android version. Following this guide will help you flash CWM recovery via DFU, no root needed here. Special thanks to Eyman Aguilar for contributing this tut.

Disclaimer: Make sure to follow every steps in this tutorial. Failure to do so will results on boot-loop or hard-brick. If there’s a steps you don’t understand, it’s better to ask before you proceed.

1: Download DFU Flasher and extract it.

2: Download the CWM recovery made for Omega Spectrum running Kitkat and move it to the extracted DFU Flasher inside images folder (if other recovery exist, rename it.)

3: Open the Downloaded DFU Flasher.

4: Double-click install_driver.bat. Follow the install wizard.

5: Double-click dfu.exe (don't mind errors, just click OK).

6: Click load and choose recovery.cfg (click OK if there's an error).

7: Click Browse and navigate to the downloaded DFU Flasher open variant folder, double click images.

8: Click Download and click Start.

Now, turn OFF your Omega Spectrum and plug it into your computer via USB Cable.
The DFU Flasher will start by first detecting your Omega Spectrum then it will start flashing.
Wait for the success message then proceed to disconnecting the USB Cable and reinserting the battery.
Enter recovery by holding Volume Up and Power button simultaneously.


Credits to: XDA, S5F FB Group, CMOS Official FB Group, Eyman Aguilar

Download Link:

• DFU Flasher tool
• CWM Recovery for Omega Spectrum running Kitkat
• Full Tutorial with Pics by the contributor

Alternatively, follow the steps below:

Requirements:

• RASHR Flash Tool (free on playstore)
• CWM Recovery for Kitkat or CWM for Jelly Bean

1. Open RASHR Flash Tool

2. Choose flash recovery

3. Tap recovery

4. Choose from other storage

5. Look for downloaded CWM

6. Choose this file then flashing will start

7. It will ask you to reboot to recovery choose yes

8. Recovery mode has an image of galaxy s5

9. Choose reboot system now

10. Choose NO twice

11. Done!

Credits goes to Jeremy Sy Manansala and Alex Haha

[ROM] Kitkat Update V.1 For MyPhone Infinity | MMX A350

Watch out for Infinity's Kitkat Update! From Micromax Canvas Knight

For those Infinity users who waited long for the turn on getting their phone's software upgrade, well, the much-awaited and much-unexpected surprise arrives. From the popular Micromax Canvas Knight A350, give way for MyPhone Infinity's Kitkat ROM update!

Getting Kitkat ROM on your MyPhone Infinity | MMX A350

Proceeding, you will learn how to finally get a android 4.4.2 Kitkat ROM upgrade on your MyPhone Infinity through getting it flashed from any custom recovery based on the popular Clockworkmod recovery and TWRP. Without further a do, here's the procedures below.

Kitkat update v.1 ROM Features:

• Based from official MTK 4.4.2 Kitkat ROM for MT6592 (A350)
• Fully Deodexed
• Init.d support
• YONIP Tweaks
• Pre-rooted

Notice From the Contributor:
"Before installing, Back up data and settings using a recommended custom recovery tool, like ClockworkMod (CWM) or TWRP, as it creates a complete image of the existing phone setup. In Recovery, choose Backup and Restore and tap Backup."


Installation: (Credits to Rymoj Serolf)

1. Make sure to get all the things needed.

2. Put "MyPhone_Infinity_Kitkat_V.1" on your Infinity's SD card.

3. Turn OFF your phone then boot to CWM Recovery or any other custom recovery using this keys (Press Power + Volume Down + Volume Up at the same time).

5. Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress)

6. Select Install Zip from sdcard and then click Choose zip from sdcard. Browse to the location of the Kitkat 4.4.2 update for MyPhone Infinity file which you copied earlier to your phone's SD card.

7. After Successful Installation, reboot phone, FIRST BOOT my take time, be patient :)


additional credits:

MMX A350 Kitkat Firmware, YONIP DEV TEAM, Sir Miyer C. Bernabe of YDT

Things needed: (Important)

• Rooted Infinity - root it here
• Custom Recovery such as CWM | TWRP - here's how
• Kitkat ROM - click here to download

MyPhone Agua Rio Color OS custom ROM on S5501

New custom ROM for MyPhone Agua Rio

Choosing proper mods and ROM for MyPhone Agua Rio has been a little bit confusing as the popular Rio came with so many build versions which causes too much complains on the users' side. But the least for the developers can do is make a mod that will guarantee its functionality on a specific Rio version that's why another custom ROM came to bring MyPhone Agua Rio another look.

From the popular Oppo OS, here comes Rio Color OS

If you were amazed with awesome interface of the famous Oppo OS, one of  MyPhone Agua Rio (S5501) users, Marion Benizano, found a way to port this on his android phone and finally released it to the Rio crowd. Getting excited? Here's the moment you've been waiting for Oppo Color OS fans.

MyPhone Agua Rio Color OS custom ROM on S5501

Following the guide below will assist you to get MyPhone Agua Rio Color OS ported from OPPO on your beloved android smartphone. Comply the things necessary for the installation and carefully follow the instructions.

Warning! Flash at your own risk.

Notes from the porter:
Please respect this post..

The popular OPPO OS is now in our MyPhone Rio. Introducing Rio Color OS..
 This is base on Oppo R1 rom.. And Ported to Rio New Versions S5501..(Not yet tested in Old versions)..

Downloadable Themes, Wallpapers, Lock-screen and many more.
Working all Gestures and Motion Except for the Off-screen gestures.
Wifi and Blootooth working perfectly.
Completely compatible with rio repartition tool.

Things you need:

• MyPhone Agua Rio S5501 unit
• Rooted - visit here to root
• TWRP or CWM Recovery - visit here to get custom recovery
• RioColorOS ROM - download here

Installation:

1. Download and RioColorOS_by_Marion.zip and put it to your Rio's SD card.

2. Boot to custom recovery. (CWM/TWRP)

3. Backup your phone. If you don't know how, here's how to backup on CWM or TWRP.

4. Wipe data/factory reset, Wipe cache, Wipe dalvic cache.

5. Go to mounts and storage, format system.

4. Go to Install Zip from SD card.

5. Choose RioColorOS_by_Marion.zip and proceed to install.

6. Wait and reboot. Done!

Enjoy your new MyPhone Rio Color OS!

Additional Notice:
Take note of some ROM issues:

Key board is not working properly so you have to manually fix in settings.

1. Go to settings
2. General Tab
3. Language and Input
4. Choose Oppo Keyboard as Default

Internal Storage is not accessible in PC only External Storage will be detected.(may be because the phone where the original ROM came from has is non expandable.

Please leave a comment if you discover another bug in this ROM.

Tips:
To show the carrier icons like the one in the screenshots just go to Display tab and tap Carrier info then choose Show carrier icon.

You can add more Gesture under General tab > Gesture &motion.

Swipe down to the right to open the notification panel and swipe down to the left to open gesture panel.


credits:

Marion Frances Benizano, Google for sources and research, XDA for the Porting guide, Other rom Developer for the advice.

How to ROOT Cherry Mobile Omega Spectrum running Kitkat

Having problems rooting CMOS after updating to Kitkat?

Here's might answer your problems. For those who want to play safe rooting their Cherry Mobile Omega Spectrum running the latest android version Kitkat, here's the tested procedure to root it in a simpler way.

How to Root Omega Spectrum running Android 4.4 Kitkat

Following the instructions will help you how to finally get your Omega Spectrum rooted permanently. All you need is to carefully follow the rooting procedure. Good luck!

Disclaimer: Do the rooting procedure at your own risk. We are not liable for anything might happen to your device after following the method.

Things you need:

• Omega Spectrum unit
• USB Cable
• Computer running Windows
• vRoot application - download here
• ADB Drivers - download here

1. Download the latest vRoot app and install it to your computer.

2. If you haven't installed drivers for your Omega Spectrum, download and install the ADB Drivers from the link provided above.

3. Connect your Omega Spectrum to your computer via USB cable.

4. Wait for your phone to be detected, if not, re-install you must properly install the drivers.

5. Open the installed vRoot app on your computer.

6. Click ROOT and wait for the app to root your Omega Spectrum.

7. vRoot will install its apps to your device. Just download and install SuperSU app from Google Play Store.

8. Open SuperSU app then Update binary, choose Normal.

9. Download and install Root Checker from Play Store and run it to confirm you have successfully rooted your Omega Spectrum.

Alternative method:

• You can use Root Genius from this separate guide.

credits:

Lysander Dominique Bien, mgyun.com, adbdriver.com

CTR: CWM-based custom recovery for MyPhone Agua Storm

CWM-based custom recovery on Agua Storm?

Yes, that's right. Getting CWM ported on MyPhone Agua Storm is a bit complicated that is why making a more fully featured custom recovery based on the popular CWM has been made to address your complains. Intrigued with this custom recovery? Give way for Carliv Touch custom recovery on its way to your MyPhone Agua Storm.

CTR for Agua Storm? What's new?

If you are not yet familiar with CTR, it is a fully touch supported custom recovery with GUI and more functions build all in one. This recovery was based on the most popular ClockworkMod recovery so it works just like CWM. Any flashable zips flashable through CWM recovery can also be flashed through CTR which made it awesome. Now if your ready, let's get the flashing started.

How to install CTR custom recovery on MyPhone Agua Storm

The following tutorial will help you how to get CTR, CWM-based custom recovery on your adored MyPhone Agua Storm. The steps have been tested and worked flawlessly for you to have lesser worries even when your first timers. Get it going then by proceeding below, be careful and good luck!

Disclaimer: Do at your own risk. Flashing may cause damage on your device when done mistakenly.

Things you need:
CTR Flashing Prerequisites - download here
Drivers Auto Installer - download here credits to XDA developer of this
Computer running Windows
MyPhone Agua Storm unit with USB Cable

Installation:

Preparing the Flash Tool

1. Extract the .rar file anywhere in you computer.

2. Open the folder where you extracted the file.

3. Run got to SP Flash Tool folder and open Flash Tool.exe
You can find it in here:
installing cwm\SP_Flash_Tool_v3.1328.0.183\Flash_Tool.exe

4. Click Scatter-loading, you can find the button at the left side of the window

5. Find the scatter file inside the folder of SP Flash Tool.
You can find it here:
installing cwm\SP_Flash_Tool_v3.1328.0.183\MyPhone-Agua-Storm_131029_backup_140305-155829\MT6572_Android_scatter_mtd_DH.txt

6. You will see some names like uboot, bootimg. etc on the list of partitions.

7. Click on the Recovery (Recovery Only)

8. Select the recovery.img file on the folder from where you extracted the .rar file. Click OK.

9. Make sure recovery is the only one checked. Now you are ready!

Flashing Procedure

1. Power off your phone

2. Take out the battery

3. Don't plug the USB cable, wait for the moment.

4. From SP Flash Tool, click Download at the top of download agent

5. After clicking Download button, a prompt will appear. Just hit YES.

6. After hitting YES, connect the USB cable and wait untill the green circle appear! That means you have successfully flashed the CTR/CWM to your phone..

Testing the Custom Recovery

1. Take the cable off

2. Insert the battery do not turn on it yet!

3. Press volume up + volume down + power at the same time.

5. If the phone turned on, press the volume up for booting to recovery.


credits:

Jezrel Arquio Luceño for the contribution, XDA and the creators of 3rd party apps.

MyPhone Pinoy.apk App and Contents For Android

Pinoy app for MyPhone android devices

MyPhone brought the nicest smartphone in the local market and continues their great job on delivering the most entry-level android phones and tablets at very competitive price. As the leading mobile manufacturer, they made an app that will help its Pinoy consumers a discover more and love their own nation even more.

Pinoy.apk, MyPhone's Pinoy app

MyPhone android units have been embedded a specially-made Pinoy app that contains proudly-pinoy contents, files, prayers, songs, and more! Enjoy and uncover the things which made it more fun staying and living here in the Philippines.

How to get Pinoy.apk app and contents for MyPhone android devices

Actually, Pinoy app is already installed in almost all android MyPhone units, but usually, it doesn't have contents so you were opt to download it. But for those who haven't had Pinoy app and its contents, This article will be guiding you how to get it. Just follow carefully what is instructed.

Things you need:

• MyPhone Pinoy.apk application - click here to download
• MyPhone android unit with micro SD card
• Pinoy contents

• For android Jelly Bean (JB) devices, download here
• For android Ice Cream Sandwich (ICS) device, download here

How to install MyPhone Pinoy.apk app

1. Simply download and the app (pinoy.apk) and put it to your phone's SD card.
2. Find the app from your SD card and tap on it then select install.
3. Open the app and done.

How to set the MyPhone Pinoy contents

1. Download and extract the Pinoy contents (make sure it is suitable for your android version).
2. Put the extracted files on your phone's SD card.
3. Open the MyPhone Pinoy app and see if it works.

How to easily ROOT MyPhone Agua Storm

Getting your MyPhone Agua Storm rooted

If you have owned one of MyPhone's previous android smartphones, getting this Agua Storm an administrator rights or the so called "root" access, fortunately, is not as difficult as you know it. After successfully gaining root-access with your MyPhone Agua Storm, you will be able to further tweak your device, remove lots of bloatwares and optimize your phone's performance. With the big help of XDA developers, rooting is made easier for every android users.

Various ways on how to root MyPhone Agua Storm

There are variety of methods on how to successfully root MyPhone Agua Storm. Just choose what rooting method you want to use. If the first procedure you tried did not work, try the other method. Just make sure to read and understand all the instructions given.

Disclaimer: Rooting may void your warranty and may mess up your device. Do it at your own risk.

MyPhone Agua Storm Rooting Procedure:

1. Download this Framaroot app and put it in the SD card of your Agua Storm.
2. Install Framaroot and open it.
3. Select SuperSU
4. Tap Boromir
5. Confirm and wait for the app to root your Agua Storm
6. Done! Reboot your phone to properly load the changes

Not working? Try other rooting method such as vRoot.

Congrats! You now have your MyPhone Agua Storm rooted!

After rooting your device, it is best to flash a custom recovery.


Great thanks to: alephzain of XDA

Cherry Mobile Omega Spectrum: Relight V Modified Stock ROM

Who wants enhanced native stock ROM on Omega Spectrum?

Like any other popular android smartphones, Cherry Mobile Omega Spectrum has been experiencing further customization and tweaks. Having an OEM device is just an awesome advantage. But for those who are tired of the custom ROM and want to try or go back to the original, factory, stock ROM, then, this enhanced or should a I say a more improved Stock ROM for Omega Spectrum.

Relight V ROM, stock ROM for Omega Spectrum with custom ROM features

Just a relief for those who seek for a more stable, bug-free ROM, this Custom Relight stock ROM will let you experience the tweaked performance and highly-customizable features from which being boasted by any other custom ROM available. Want to try it out? Just feel free to have it your way.

How to get Relight V ROM installed on your Cherry Mobile Omega Spectrum

Proceeding below will let you flash the Custom Relight Stock ROM on your Cherry Mobile Omega Spectrum. With the great help of the S5J devs, the contributor of the ROM, we have put up all the steps and made it easier and more informative for you to make it work on your phone.

Disclaimer: Do the flashing at your own risk. We are not responsible for any possible issues it may cause. We are just here to help you.

Features:

• Stock Interface
• Deodexed
• Tweaks added
• Fixed previous stock issues
• Zipaligned
• Busybox
• Inid.d supported

Things you need:

• Rooted Omega Spectrum - Here's how to root
• CWM recovery - Don't have it? Follow this guide
• Relight V ROM by A_Aziz - Download here

Installation:

• Download the ROM "Relight_V_S5J-by-A_Aziz.zip" and put file on the root of your phone's SD card.
• Boot to CWM recovery mode.
• (Optional) Make a backup first if you don't have one. Follow this guide how.
• Wipe data/factory reset, Wipe cache, Wipe dalvic cache
• Go to mounts and Format System
• Go to Install Zip from SD card
• Select Relight_V_S5J-by-A_Aziz.zip and confirm to install.
• Wait for the installation to be completed
• Reboot system and it's done.

Enjoy the Relight V Modified Stock ROM on your Omega Spectrum!

credits to: advan s5j group, A_Aziz, Modder Anonymous


Feel free to leave your feedback. Furthermore, share us your screenshots. Thanks!

Android Kitkat 4.4 update for Cherry Mobile Omega Spectrum

The much-awaited Kitkat update for Cherry Mobile Omega Spectrum arrives

If you are one of the Cherry Mobile Omega Spectrum users, I'm sure you are not going to miss out this newest Cherry Mobile treat, the Android KitKat 4.4 software upgrade. Currently, Android version 4.4 known as Kitkat is the latest android version from which officially came out on the month of September 2013. Now, it came to Omega Spectrum just this month and a lot of users mobbed the service centers aiming for a Kitkat 4.4 update on their owned Cherry Mobile Omega Spectrum.

How to update Cherry Mobile Omega Spectrum to Android Kitkat 4.4

Disclaimer: Do at your own risk.

Note: Backup all your files including contacts, apps, images, musics and videos, and your files in your internal storage, phone storage and SD card.

Android Kitkat 4.4 Key Features:

• New Look, Refined Design
• Improved Overall Performance (Multitasking, Rendering)
• New Awesome Features Added

Important: Your Omega Spectrum must have Stock Recovery not custom recovery installed. Follow this guide how to get back to Stock recovery.

Additional Notes: After getting the Kitkat update, most mods made for Cherry Mobile Omega Spectrum running Jelly bean 4.2 may not work or might even brick it. You need to wait for the devs to release mods made for CMOS running Kitkat 4.4.

Procedure:

1. Download Omega Spectrum upgrade here: http://www.cherrymobile.com.ph/phoneupdates/spectrum/H600_Kitkat4.4_ota.zip

2. Insert your SD card to your Omega Spectrum.

3. Copy the H600_Kitkat4.4_ota.zip to your SD card using a micro USB cable plugged in to your computer.

NOTE:
a.   Please do not unzip the file. Just copy and paste it to your SD card.
b.   Please make sure that is the only .zip file that is on the SD card ( to be sure have your SD card formatted and delete the folders and files on your SD card except the H600_Kitkat4.4.zip ).

4. Turn off your Omega Spectrum.

5. When the Omega Spectrum is turned off. press the power button + volume up button for 5 seconds you will feel a vibration.

6. Choose english. To navigate, use volume up to scroll up and down to scroll down and press the power button to confirm.

7. Navigate again using the volume up or down button to select "apply update from external storage". Press the power button to confirm.

8. Navigate again using the volume up or down to "H600_Kitkat4.4.zip" and press the power button to confirm.

9. The upgrade will start, there will be yellow phrases. the last phrase will be "Install from sdcard complete".

10. Navigate again using volume up or volume down to select reboot system now press power button to confirm.

11. There will be a prompt that "Android is upgrading" please wait until it is finished. Upgrade to Kitkat 4.4.2 version of Omega Spectrum is now completed.

Congratulations! You have successfully updated your Omega Spectrum to Android Kitkat 4.4. Enjoy!

Source: Cherry Mobile

How To Dump / Backup ANY Android ROM

Getting full ROM backup or making a ROM dump on any android device

So, you came to fully backup your device or make a ROM dump? While thinking of my next article to write, I just thought of making a ClockworkMod (CWM) flashable zips for applying mods but considering the possible risks on our android device, I thought of creating a current ROM backup state in case something unwanted happens. Well, here it is.

On this article, I’ll be presenting the various ways and the step by step guides on how to fully backup ROM state or create a ROM dump on any android device (smart phones or tablets). I have already created an article about the ways how to backup files, apps, etc. on any android device but from there, I was not able to discuss deeply how to do ROM backup or ROM dumping.

Ways to backup ROM and dump ROM applicable for any Android phones

If In case you don’t know, there are several ways to do a full ROM backup, that’s why I made this article so you can choose from the ways how to do it on your own which also varies from your device. So here are the ways which I already knew as of this time:


1. For MediaTek (MTK) devices, using SP Flash Tool and MTK Droid Root and Tools can help us make a full ROM backup or ROM dump.

• Follow this guide how to backup or dump any MTK device. If it's complicated for you or if you have faced issues with the method, following the method 3 might work for you.

2. For any device having ClockworkMod (CWM) recovery and TWRP, making a Nandroid backup can also provide one.

• Follow this guide how to make a Nandroid backup.

3. For all other android devices as long as it has ROOT access or Superuser rights, doing the simple ROM dumping method through romdump script for any partitions will work great.

• We will discuss that below.

Easy way to dump or backup any android ROM

Disclaimer: We are not liable for any issues as a result of the procedure on your device. You are the one responsible of deciding to mess with your device so try at your own risk.

Things we need:

• Rooted android device - No root? Here's how to
• Root Explorer or any similar file manager app
• Terminal Emulator - Download from Play Store and install it to your android device
• ROMdump script - Download here and out to your phone's SD card

Instructions:

1. Open Root Explorer and extract romdump_v82b.zip.

2. Copy the extracted romdump file, then paste it on the root data/local/ folder.
3. Open Terminal Emulator
4. Type: su
5. Type: chmod 04755 /data/local/romdump
6. Type: /data/local/romdump

7. The script will perform the ROM dump, just wait for it to be done.
8. Once done, go to Root Explorer and find the romdump folder
9. From there, you will see the backup / romdump you have made.

Congrats! Now, you have made a ROM dump of your device. Use it as a backup or as a base ROM for making custom ROMs.

credits: http://android.podtwo.com/romdump/

How to Enable Init.d Support on most Android

Starting to apply mods and tweaks but it ask for Init.d support?

Moving on after rooting an android device,  we rush on optimization of our android device's performance through flashing mods or tweaks. Most of these optimization files are scripts and tweaks on the root build properties and on the system Init.d. For any android device to comply the said tweaks, it is required to enable Init.d support to accept the changes and optimization.

For those who don't know how to enable Init.d support on your android device, here's the easiest method for you to follow. The following instruction will allow any android device running any ROM to enable Init.d support. With the big help of Ryuinferno from XDA, we bring you Term-init, enabling Init.d support through terminal emulator method.

How to Enable Init.d Support on most Android

Disclaimer: We don't claim any risks upon applying this method. You are the one responsible for any possible issues it may cause to your device.

Requirements:

• Any rooted android device - Not rooted yet? Follow this guide.
• Terminal Emulator - Download from Play Store then install it to your android device
• Busybox applets - Download from Play Store then install it to your android device
• Term-init script - Click here to download then put it in the root of your device SD card.

 Procedure:

1. Open Terminal Emulator.
2. Type: su
3. Grant Superuser access when asked
4. Type in: sh /sdcard/term-init.sh
5. The script will execute and just follow the instructions showed.

Now that you have Init.d support enabled, you can now enjoy more tweaks!

credits: Ryuinferno for his work http://forum.xda-developers.com/showpost.php?p=32716412&postcount=2

Flash MyPhone Ocean Pro Stock ROM via SP Flash Tool

MyPhone Ocean Pro Stock ROM for total restore

MyPhone Ocean Pro has the specs that can easily be modified and customized. An entry-level smartphone with a classy look has been mobbed by Filipinos and started to gain enough personnel to developed this awesome smartphone.

For new users and new to tweaking the said device, it was already expected for them to make some mistakes on their first or trial attempts. If you can read some of this blog's article on modding, it is always a must to get your own backup of the ROM. But for MyPhone Ocean Pro users who haven't made the backup ROM, here's the Stock ROM for you. Even though I have made a separate article about the Stock ROM flashable through CWM, some of the users don't have it and some of the MyPhone Ocean Pro users can't boot to CWM, so for those who suffers this situation, today's article will be very friendly for you.

What this Stock ROM for MyPhone Ocean Pro can do?

• Total factory restore
• Fix most issues such as (invalid IMEI, soft-brick, hard-brick, boot-loops, etc.)
• Fresh ROM

Download:

• MyPhone Ocean Pro Stock ROM via SP Flash Tool
• MTK USB Drivers - Download and install it (credits to the developer of this tool)
• SP Flash Tool - download the recommended or latest version and extract it to you PC

How to Flash?

• Proceed directly on HOW TO RESTORE BACKUP.

credits: Hans Rob Mt

Performance and Battery Tweak For ALL Android Device

Performance and battery problem? Worry NO MORE!

Most android devices are not built with powerful specs and even though they have, they are not fully optimized to work at their best performance and save as much juice of their battery. Plenty of these users tend to worry and suffer from a minimal experience with their android device and try to look for an app, mods, and ROM to give them a solution just to make it out from this issues. In fact, even a heavily-modified device still can't work on its optimum potential. What we really need here is the proper tweaks that was made to address the issues, and we are lucky that gauravj bring us Performance and Battery Tweak.

With this Performance and Battery Tweak, any android device running Gingerbread (GB), Ice Cream Sandwich (ICS), Jelly Bean (JB), or even KitKat, can achieve the smoothest performance and the longest battery life. After you flash this mod, you can say your device works like a CHARM!

What's with Performance and Battery Tweak?

This mod tweaks the build.prop of any ROM. Below are the following it features:

• Full memory management with 5 different configs.
• Zipalign apps in "/system" at every boot, and apps in "/data" every 48 hours.
• CPU governors tweaks and improvements for better performance and battery life.
• Increased SD Card read-ahead cache to 2048 KB to improve SDCard write/read speed.
• Nos entropy seeder generator engine used to reduce lags.
• Ad blocking.
• Battery life improvements.
• SQLite and database optimizing every 48 hours.
• Network TCP tweaks.
• Kernel, VM and sysctl tweaks and improvements.
• File system speedup.
• Build.prop tweaks and improvements.
• Cleans log files and tombstones at every boot.
• Many other tweaks for better performance and battery life!
• Net booster tweaks
• and many more

How to install Performance and Battery Tweak for ALL Android device?

Disclaimer: Flash at your own risk.

Before applying, make sure to have this:

• Android Gingerbread, ICS, Jelly Bean, KitKat ( WORKS ON ANY ROM! )
• Init.d supported - Follow this guide to enable init.d support
• Root - Here's how to root
• ClockworkMod recovery (4 or higher) or CWM-based recovery - get it here for Mediatek, for others, get here
• 4 MB of free space in /system
• Performance and Battery Tweaks flashable zip - download here
• BACKUP YOUR ROM

How to flash?

1. Download the Performance and Battery Tweak.zip and put it to your phone's SD card.

2. Boot to recovery mode.
3. Optional, backup first if you don't have a backup. Follow this guide.

4. Install Zip from SD card.

5. Select and flash Performance and Battery Tweak.zip

6. Reboot normally and experience the smoothness!

credits: gauravj 

LeWa OS V5 Custom ROM Port For MyPhone Ocean Pro

New custom ROM present for MyPhone Ocean Pro

MyPhone Ocean Pro was not withheld from having awesome customization just like what the other android smartphones had. In fact, we have successfully rooted this device from which we have gained administrator rights with our device, next, ported a custom recovery in it that allows flashing most of the mods easily.

LeWa OS V5 custom ROM ported to MyPhone Ocean Pro

This new treat will be the custom ROM named LeWa OS V5, another one of the most popular ROMs present in the android development world, ported to MyPhone Ocean Pro. If you have aimed from getting a taste of a iOS-like or MIUI look-alike interface with fast and speedy performance, this one will surely bring you a hit of it.

Here's how to install LeWa OS V5 ROM on your MyPhone Ocean Pro

Without further babbling, here's how to flash LeWa OS on your MyPhone Ocean Pro. The steps are made to successfully flash the custom ROM with lesser or no problems at all. Please carefully read and follow the instructions.

Features:

• LeWa UI
• LeWa launcher ( MIUI Look alike )  
• Clean port, No tweaks added
• Rooted
• Zipaligned
• Storage Swapped

Bugs:

• None, Report to the ROM creator Christoper Infante

Instructions:

• Requirements:
• Rooted - Follow this guide how to root
• TWRP/CWM recovery- Don't have one? Here's how to get it
• LeWa OS V5 ROM - Click here to download
• GApps (Google Play Store) - Click to download

• Installation:
• Download the ROM (Lewa_Ocean_Pro.zip) and GApps (gapps-jb-20130812-signed.zip) and put the 2 files on your phone's SD card.
• Boot to TWRP / CWM recovery mode.
• (Optional) If you don't have any backup ROM, do a backup first. Follow this guide how.
• Wipe data/factory reset, Wipe cache, Wipe dalvic cache
• Go to mounts and Format System
• Go to Install Zip from SD card
• Find and choose the Lewa_Ocean_Pro.zip and proceed to install
• Wait for the ROM installation to be completed
• Again, go to Install Zip from SD card
• Find and choose gapps-jb-20130812-signed.zip and proceed to install
• Wait until it is done
• Reboot.
• Done

• Fixing Boot Loop:
• Wipe cache, Wipe dalvic cache, Fix permission and reboot.

Credits:

• Thanks to Christoper Infante for the ROM

AOSP Turbo Edition, Lightest ROM For Cherry Mobile Flare S2

Another special edition custom ROM arrives on Cherry Mobile Flare S2

When Xolo Q700S firmware came to give the development of Cherry Mobile Flare S2 a hand, it offered a sudden increase of success possibilities for the tweaks to work well on the said device. That's is why having an OEM version of the smartphone with a lot of developers is a great advantage, Cherry Mobile Flare S2 is a great example.

For those Cherry Mobile Flare S2 users who just want to experience fast gaming and snappy multitasking, the custom ROM you have been waiting for has arrived. The Xolo-Based AOSP Turbo Edition flaunts the Lightest custom ROM which only amounts 151.1 MB (awesome!) available for Cherry Mobile Flare S2 having a Xolo Q700S firmware. This special edition custom ROM is another reason for Cherry Mobile Flare S2 users to modify their smartphone, so if you are one of them, continue with the installation process below.

How to get flashed Xolo-based AOSP Turbo Edition, Lightest ROM on Cherry Mobile Flare S2 with Xolo Q700s firmware?

Following the article will help you get AOSP Turbo Edition ROM installed in your Flare S2. Be sure to carefully follow what is asked and what is instructed before messing up with your device.

Disclaimer: Flashed the presented custom ROM at your own risk. Following the guide is your choice therefore, it is your full responsibility for whatever your device might came up.

Note from the developer:

This is my 1st ROM port :D

• Flare S2 must be upgraded to "XOLO FIRMWARE" don't proceed if you have FS2/Stock Firmware
• Read all info before asking
• Respect the work
• You can report bugs in a nice way

Features:

• AOSP Look and Feel
• Debloated
• 210 DPI
• Trebuchet Launcher
• Minimal RAM usage (good for gamers)
• 4.3 Ported Camera, no force close
• DSP Manager
• Superuser by Koush
• Minimal GApps
• cLock(CM10.1 clock and weather widget)
• CM10.1 Mms.apk
• CyanogenMod
• Torch
• Integrated Perfomance Control app
• CyanogenMod Calculator
• Cherryness Removed
• Google Play Edition boot and shutdown animation
• Google Play Music as default music player
• ADB Insecure

Tweaks:

• Zipaligned
• SQLite optimization
• build.prop tweaks
• Automatic RAM Booster/Flusher
• Internet speed tweak
• sHaveged entropy generator
• Loopy smoothness tweak

Integrated apps on Settings:

• Greenify
• Xposed Installer
• GravityBox
• Battery Calibration
• Terminal Emulator
• Superuser
• Perfomance Control 

Tips and Tricks:

• Boost your RAM via Terminal Emulator, open Terminal Emulator, type su -c boost. Wait until it's finished. Enjoy the boost. 

Enable RAM Swap:

• Open Terminal Emulator. Type su -c rak. Wait until the process is finished. Close Terminal Emulator. Enjoy the blazing speed! 

Turn off RAM Swap:

• Open Terminal Emulator. Type su -c off. Wait for the process. Close Terminal Emulator. 

Download Link:

• [ROM] [Xolo Based] AOSP Turbo Edition Lightest ROM [151.1MB] (download the 2 files)

Requirements:

• Rooted Flare S2 - visit here on how to root
• Cherry Mobile Flare S2 converted to Xolo Q700s - follow this guide (IMPORTANT OR ELSE MAY BRICK YOUR DEVICE)
• CWM recovery- get it here
• AOSP Turbo Edition ROM (download the 2 files, ROM and the Patch)

Installation:

• Download the files and put the files to the root of Flare S2 phone SD card.
• Boot to CWM recovery mode.
• Optional (Make a backup of your ROM if you don't have one. Follow this guide.)
• Wipe data/factory reset, Wipe cache, Wipe dalvic cache
• Go to Install Zip from SD card
• Choose AOSP Turbo Edition.zip and proceed to install and wait until it's completed
• Once done, do Wipe data/factory reset
• Again, go to Install Zip from SD card
• Select Storage-CameraFC-FIXED.zip and proceed to install and wait until it's completed
• When done, reboot the system.

Camera Fix: Try to use Stock Camera from Xolo, or download 3rd-Party apps from Google Play Store.

credits:

XDA-developer, Alkane Mallari, Kards Le Sharpeye, Xolo Groups, Sa nagbabayad ng kuryente namin & to all who help me (Reymar) to build this port rom :D

Stock ROM For MyPhone Iceberg Slim (CWM-Flashable)

Got tired of stock? Don't lose it MyPhone Iceberg Users, I tell you..

Getting rooted then followed by a custom recovery, it opened the opportunity for MyPhone Iceberg Slim users to replace their stock or original system experience new taste, tweak and customization. Just by searching on Google search engine for the mods and scripts, in an instant, you will be given tons of choices, it's a great thing yet the problem of choosing occurs.

In situations that you have MyPhone Iceberg Mini smartphone with you unfavoured, the things such as backup is as precious as gold. As soon as possible, any developers recommends you to have a backup of your current working ROM, so as a relief for those MyPhone Iceberg Slim users who don't have one, here's the treat for you.

At this juncture, get Deodexed Stock ROM made for MyPhone Iceberg Slim that is flashable through ClockworkMod (CWM) Recovery or any CWM-based custom recovery. Thanks to Mr. Remon Piamonte's work, Iceberg Slim users have lesser worries of flashing, testing tweaks and other stuffs alike.

Here's how to get Deodexed Stock ROM flashed on your MyPhone Iceberg Slim thru CWM recovery

Disclaimer: Flash the deodexed stock ROM on your MyPhone Iceberg Slim at your own risk. You, as the owner, has the full responsibility for any changes it will make to your device.

The things you need:

• Rooted - if you're not rooted yet, here's how
• CWM Recovery or any CWM-based recovery such as CTR - get it here if you don't have it\
• Stock ROM - download here (credits to Remon Piamonte)

Steps:

Backup:

1. BACKUP ALL YOUR DATA FIRST (your contacts / SMS / APP). (Use Titanium Backup for backing up apps, while you can use Super backup to create a backup of your contacts and SMS).

Installation:

1. Comply the things needed. After downloading the Stock ROM (AROMA_STOCK_Agua_Iceberg_Slim_V0.13.zip), put it to your phone's SD card.

2. Reboot to recovery mode (When your phone is OFF, press and hold Volume up + Volume down + Power button and wait, then select Recovery by pressing Volume up)

3. Make a backup of your ROM, if you don't have one. You can follow this guide if you have CWM.

4. Do full wipe. Wipe data/factory reset, Wipe Cache, Wipe dalvic cache (for CWM users, find it in advance).

5. Go to Install Zip from SD card.

6. Choose AROMA_STOCK_Agua_Iceberg_Slim_V0.13.zip, then proceed to flashing.

7. Wait for it to complete. Reboot.


credits to:

Myphone, Amarullz for AROMA Installer, XDA forum, Yonip Dev Team

source:

https://www.facebook.com/notes/myphone-iceberg-slim-official-yonip_dev_team/stock-deodexed-flashable-rom/251145718407525

CWM-Flashable Stock ROM For MyPhone Ocean Pro

Already got ROM backup of your MyPhone Ocean Pro?

Probably, MyPhone Ocean Pro smartphone users like you have already rooted and installed ClockworkMod (CWM) Recovery, that made them capable of applying a lot of tweaks to their beloved smartphones. However, we all know the risks we take whenever applying some sort of mods, that could even break our devices and leave it unusable, if you are not knowledgeable of that matters, please try to understand what is rooting and what does it can do to your device.

Stock ROM for MyPhone Ocean Pro

In order to secure our device's safety, a backup should always be prepared in case of worst situation. This time, here comes another treat to MyPhone Ocean Pro users, their very own Stock ROM flashable through Clockworkmod Recovery and other CWM-based custom recoveries.

How to flash MyPhone Ocean Pro Stock ROM in CWM

Without further a do, here's how to successfully go back to MyPhone Ocean Pro stock ROM by simply using the easiest method which is through flashing from CWM. When you are ready, please proceed to the procedures below.

Disclaimer: Flash the stock ROM version below at your own risk. Make a backup if you don't have one.

Stock ROM features:

• Deodexed
• Zipaligned
• Init.d support
• Pre-rooted
• Data app support

Download

• MyPhone Ocean Pro Stock ROM

Installation:

1. Download the ROM (StockOpro.zip) and put it on your MyPhone Ocean Pro's SD card.
2. Boot in CWM Recovery.
3. Make a backup of your ROM if you don't have one. Follow this guide.
4. Wipe cache, Wipe data/factory reset, go to advance and Wipe dalvik cache, go to mounts and format system.
5. Select Install Zip From SD Card and choose and flash StockOpro.zip.
6. Reboot.


credits:

Hans Rob Mt for the stock ROM, Hans Taglucop, mtkdroidtools, xda forum, myphone ocean pro 

How To Flash Stock / Custom Recovery Using SP Flash Tool

Having problems with flashing recoveries on your device? Android users like you might get some interest on today's article. As most of us, android users, who wants to tweak their phones, we can say that the mostly-used region when applying modifications is the recovery partition. But what if you can't get your recovery installed in your device? That's the question that we will going to find a solution.

Flashing a recovery is easier with the use of apps such as Mobile Uncle Tools, Rashr Recovery Tools, and other utility apps, also, we can perform image flashing through ADB or through terminal emulator but for Mediatek, there is one method which supposed to be the best method of flashing images but somehow quite took for granted, through SP Flash Tool is the method I am talking about. Some apps might not work in an MTK device, but with Mediatek's very own SP Flash Tool, it works like a charm!

Below is the complete guide how to flash a stock or  a custom recovery for any Mediatek device, but though from that fact, you must provide the proper image to be flashed to your device or else it will mess it up. We made up all the steps to make it easier for you to do this successfully. All you need is focus and a little brain.

How To Flash Stock/Custom Recovery Using SP Flash Tool

Only follow the steps provided. Applying the procedure means you are fully responsible for the possible outcome of your device. If you are confused, read the steps again, if you hesitate, do enough research.

Things you need:

• PC/Laptop running Windows
• MTK-based device: MT6595, MT6592, MT6589, MT6582, MT6577, MT6575, MT6572, MT6573
• Scatter File for your MTK device - Get it here
• SP Flash Tool - Get it here (download the recommended or latest version)
• Drivers - Download here
• USB Cable

Preparations:

Download and install the Drivers (click the Install bat file and wait for it to finish the installation so don't close it). Create your own scatter file if you don't have one, it differs from each MTK device. Download and extract SP Flash Tool. Finally the recovery (stock or custom/CWM/TWRP) which is made for your device (make sure it is named as recovery only not cwm_recovery, etc.), don't flash recovery that is not made for your device.

Instructions:

1. Open SP Flash Tools and click Scatter Loading, now select the scatter file of your device.

2. Make sure all boxes are NOT checked, if there's a check, remove it by clicking the check.

3. Now, click RECOVERY from the list. A new window will appear, find the recovery image that you want to flash or install and click Open.

4. It will now look like the image above. The RECOVERY is the ONLY one checked on the list and you can see the location of the recovery image that you are going to flash.

5. TURN OFF your android phone. When it is already off, click the Download button on the SP Flash Tool, then click Yes. After that, connect your switched-OFF phone to your computer using USB Cable.

6. The tool will detect your phone and flash the recovery, if your computer can't detect your phone, re-install the Drivers that I have provided. Wait until a prompt with green circle will appear, that means the flashing is done successfully.

Congrats! You are done flashing the stock/custom recovery for your MTK-based device.