Monday, July 28, 2014

Guide: Carliv Touch Custom Recovery For MyPhone Ocean Lite

Got a working custom recovery on MyPhone Ocean Lite?

It's been a tough week for me that I haven't made much update with my blog as I was busy programming a system. Going back, have you got custom recovery working on your MyPhone Ocean Lite android smartphone? If not yet, you are lucky to get bumped on this webpage.

Here's CWM-based custom touch recovery for you

For those who are not aware of what type of device you have, Ocean Lite's has a different kind of file system from which the actual Clockworkmod custom recovery do not support officially. That took android developers a hard time to get CWM recovery ported to this kind of Mediatek device. Fortunately, with the work of the great Carliv, thus, made this problem solved amazingly.


How To Flash Carliv Touch Recovery on MyPhone Ocean Lite?


Following this guide, finally, you will be able to install Clockworkmod-based recovery on your MyPhone Ocean Lite. After this, you can flash any flashable mods as much as you want just like using CWM. If you're, it's time to start the flashing. Don't forget to thank Mr. Siong for this contribution bringing Carliv Touch Recovery to Ocean Lite device.

Disclaimer: Flash at your own risk. We are not responsible for any bricked device and anything bad it may cause.

For MTK MobileUncle Tools

Instructions: (Before anything else, PLEASE MAKE A BACKUP)

1. Put the myphone_ocean_lite_ctr.img to your SD Card.
2. Install MTK_Mobile_Uncle_Tools_2.9.5.apk.
3. Open/run MTK Mobile Uncle Tools.
4. Go to Recovery Update.
5. Then select myphone_ocean_lite_ctr.img.
6. There will be pop ups, just choose Yes.

Note: If myphone_ocean_lite_ctr.img doesn't show on Recovery Update, rename it to "recovery", it should be like "recovery.img". If doesn't work, try Rashr - Flash Tool instead of Mobile Uncle Tools.

For Rashr - Flash Tool

Instructions: (Before anything else, PLEASE MAKE A BACKUP)
1. Put the myphone_agua_hail_cwm.img to your SD Card.
2. Install Rashr.apk
3. Open/run Rashr - Flash Tool
4. Press Flash Recovery
5. Then select myphone_ocean_lite_ctr.img.
6. There will be pop ups, just choose the positive buttons xD (Yes, yes).
Note: If myphone_ocean_lite_ctr.img doesn't show on Recovery Update, rename it to "recovery", it should be like "recovery.img". If doesn't work, try the instruction for MTK MobileUncle Tools.

Credits to contributor Siong.

Requirements and Downloads:

No comments:

Post a Comment