Guide: Carliv Touch Custom Recovery For MyPhone Ocean Lite

Got a working custom recovery on MyPhone Ocean Lite?

It's been a tough week for me that I haven't made much update with my blog as I was busy programming a system. Going back, have you got custom recovery working on your MyPhone Ocean Lite android smartphone? If not yet, you are lucky to get bumped on this webpage.

Here's CWM-based custom touch recovery for you

For those who are not aware of what type of device you have, Ocean Lite's has a different kind of file system from which the actual Clockworkmod custom recovery do not support officially. That took android developers a hard time to get CWM recovery ported to this kind of Mediatek device. Fortunately, with the work of the great Carliv, thus, made this problem solved amazingly.

How To Flash Carliv Touch Recovery on MyPhone Ocean Lite?

Following this guide, finally, you will be able to install Clockworkmod-based recovery on your MyPhone Ocean Lite. After this, you can flash any flashable mods as much as you want just like using CWM. If you're, it's time to start the flashing. Don't forget to thank Mr. Siong for this contribution bringing Carliv Touch Recovery to Ocean Lite device.

Disclaimer: Flash at your own risk. We are not responsible for any bricked device and anything bad it may cause.

For MTK MobileUncle Tools

Instructions: (Before anything else, PLEASE MAKE A BACKUP)

1. Put the myphone_ocean_lite_ctr.img to your SD Card.
2. Install MTK_Mobile_Uncle_Tools_2.9.5.apk.
3. Open/run MTK Mobile Uncle Tools.
4. Go to Recovery Update.
5. Then select myphone_ocean_lite_ctr.img.
6. There will be pop ups, just choose Yes.

Note: If myphone_ocean_lite_ctr.img doesn't show on Recovery Update, rename it to "recovery", it should be like "recovery.img". If doesn't work, try Rashr - Flash Tool instead of Mobile Uncle Tools.

For Rashr - Flash Tool

Instructions: (Before anything else, PLEASE MAKE A BACKUP)
1. Put the myphone_agua_hail_cwm.img to your SD Card.
2. Install Rashr.apk
3. Open/run Rashr - Flash Tool
4. Press Flash Recovery
5. Then select myphone_ocean_lite_ctr.img.
6. There will be pop ups, just choose the positive buttons xD (Yes, yes).
Note: If myphone_ocean_lite_ctr.img doesn't show on Recovery Update, rename it to "recovery", it should be like "recovery.img". If doesn't work, try the instruction for MTK MobileUncle Tools.

Credits to contributor Siong.

Requirements and Downloads:

• Rooted Phone - If not, please go here
• MTK MobileUncle Tools
• Carliv Touch Recovery for Ocean Lite
• Rashr - Flash Tool
• ClockworkMod

Flash MyPhone Ocean Pro Stock ROM via SP Flash Tool

MyPhone Ocean Pro Stock ROM for total restore

MyPhone Ocean Pro has the specs that can easily be modified and customized. An entry-level smartphone with a classy look has been mobbed by Filipinos and started to gain enough personnel to developed this awesome smartphone.

For new users and new to tweaking the said device, it was already expected for them to make some mistakes on their first or trial attempts. If you can read some of this blog's article on modding, it is always a must to get your own backup of the ROM. But for MyPhone Ocean Pro users who haven't made the backup ROM, here's the Stock ROM for you. Even though I have made a separate article about the Stock ROM flashable through CWM, some of the users don't have it and some of the MyPhone Ocean Pro users can't boot to CWM, so for those who suffers this situation, today's article will be very friendly for you.

What this Stock ROM for MyPhone Ocean Pro can do?

• Total factory restore
• Fix most issues such as (invalid IMEI, soft-brick, hard-brick, boot-loops, etc.)
• Fresh ROM

Download:

• MyPhone Ocean Pro Stock ROM via SP Flash Tool
• MTK USB Drivers - Download and install it (credits to the developer of this tool)
• SP Flash Tool - download the recommended or latest version and extract it to you PC

How to Flash?

• Proceed directly on HOW TO RESTORE BACKUP.

credits: Hans Rob Mt

LeWa OS V5 Custom ROM Port For MyPhone Ocean Pro

New custom ROM present for MyPhone Ocean Pro

MyPhone Ocean Pro was not withheld from having awesome customization just like what the other android smartphones had. In fact, we have successfully rooted this device from which we have gained administrator rights with our device, next, ported a custom recovery in it that allows flashing most of the mods easily.

LeWa OS V5 custom ROM ported to MyPhone Ocean Pro

This new treat will be the custom ROM named LeWa OS V5, another one of the most popular ROMs present in the android development world, ported to MyPhone Ocean Pro. If you have aimed from getting a taste of a iOS-like or MIUI look-alike interface with fast and speedy performance, this one will surely bring you a hit of it.

Here's how to install LeWa OS V5 ROM on your MyPhone Ocean Pro

Without further babbling, here's how to flash LeWa OS on your MyPhone Ocean Pro. The steps are made to successfully flash the custom ROM with lesser or no problems at all. Please carefully read and follow the instructions.

Features:

• LeWa UI
• LeWa launcher ( MIUI Look alike )  
• Clean port, No tweaks added
• Rooted
• Zipaligned
• Storage Swapped

Bugs:

• None, Report to the ROM creator Christoper Infante

Instructions:

• Requirements:
• Rooted - Follow this guide how to root
• TWRP/CWM recovery- Don't have one? Here's how to get it
• LeWa OS V5 ROM - Click here to download
• GApps (Google Play Store) - Click to download

• Installation:
• Download the ROM (Lewa_Ocean_Pro.zip) and GApps (gapps-jb-20130812-signed.zip) and put the 2 files on your phone's SD card.
• Boot to TWRP / CWM recovery mode.
• (Optional) If you don't have any backup ROM, do a backup first. Follow this guide how.
• Wipe data/factory reset, Wipe cache, Wipe dalvic cache
• Go to mounts and Format System
• Go to Install Zip from SD card
• Find and choose the Lewa_Ocean_Pro.zip and proceed to install
• Wait for the ROM installation to be completed
• Again, go to Install Zip from SD card
• Find and choose gapps-jb-20130812-signed.zip and proceed to install
• Wait until it is done
• Reboot.
• Done

• Fixing Boot Loop:
• Wipe cache, Wipe dalvic cache, Fix permission and reboot.

Credits:

• Thanks to Christoper Infante for the ROM

CWM-Flashable Stock ROM For MyPhone Ocean Pro

Already got ROM backup of your MyPhone Ocean Pro?

Probably, MyPhone Ocean Pro smartphone users like you have already rooted and installed ClockworkMod (CWM) Recovery, that made them capable of applying a lot of tweaks to their beloved smartphones. However, we all know the risks we take whenever applying some sort of mods, that could even break our devices and leave it unusable, if you are not knowledgeable of that matters, please try to understand what is rooting and what does it can do to your device.

Stock ROM for MyPhone Ocean Pro

In order to secure our device's safety, a backup should always be prepared in case of worst situation. This time, here comes another treat to MyPhone Ocean Pro users, their very own Stock ROM flashable through Clockworkmod Recovery and other CWM-based custom recoveries.

How to flash MyPhone Ocean Pro Stock ROM in CWM

Without further a do, here's how to successfully go back to MyPhone Ocean Pro stock ROM by simply using the easiest method which is through flashing from CWM. When you are ready, please proceed to the procedures below.

Disclaimer: Flash the stock ROM version below at your own risk. Make a backup if you don't have one.

Stock ROM features:

• Deodexed
• Zipaligned
• Init.d support
• Pre-rooted
• Data app support

Download

• MyPhone Ocean Pro Stock ROM

Installation:

1. Download the ROM (StockOpro.zip) and put it on your MyPhone Ocean Pro's SD card.
2. Boot in CWM Recovery.
3. Make a backup of your ROM if you don't have one. Follow this guide.
4. Wipe cache, Wipe data/factory reset, go to advance and Wipe dalvik cache, go to mounts and format system.
5. Select Install Zip From SD Card and choose and flash StockOpro.zip.
6. Reboot.


credits:

Hans Rob Mt for the stock ROM, Hans Taglucop, mtkdroidtools, xda forum, myphone ocean pro 

Flash CWM Recovery on MyPhone Ocean Pro

Start flashing mods on MyPhone Ocean Pro with ClockworkMod recovery

Visiting this article seems you have probably rooted your MyPhone Ocean Pro and you are currently looking for answers on what's next after rooting am I right? Well, as any other android experts suggest to new or old android users like you, getting a custom recovery, preferably the popular ClockworkMod recovery, installed on your android phone is always a wise decision to take because it will allow any of your device to create its own backup in just a matter of minutes.

Following this article, you will find out how to get CWM recovery flashed in your MyPhone Ocean Pro from the guides below that we have put up altogether. Just be careful to follow the steps instructed to reduce the possibility of damaging your device.

Here's how to flash CWM Recovery on MyPhone Ocean Pro

Please Read: Just to make this clear, do the following methods at your own risk. We are not liable for any brick, bootloops, etc. even though the steps are tested to work.

Here's the things you need:

• Rooted MyPhone Ocean Pro - Here's how to root
• Mobile Uncle Tools - Download here (shared by kiyee)
• CWM Recovery image for Ocean Pro - Download here

Optional:

• If you don't have any backup of your device, here's how to backup.

Procedure:

1. Download all the things we need and put it to your phone's SD card. Make sure NOT to put them inside of any folder.

2. Install Mobile Uncle Tools then open it. Go to Recovery Update.

3. Select myphone_ocean_pro_cwm.img, it will ask you to proceed, tap Yes.

4. Wait for few seconds and it will ask again to reboot to recovery, tap Yes.

5. Done! Enjoy.


Additional Notice: Do a nandroid backup immediately just in case you have issues or worries on flashing mods, at least you have an easy backup. Here' how to backup easily with CWM recovery.


credits to Reymark Sunga Elvambuena

How To Root MyPhone Agua Ocean Lite, Mini

After checking my blog's visits, I found out that there's too many users searching on Google for a guide on how to root their MyPhone Agua Ocean Lite and Mini, that's why I have thought of creating this article.

Just an update, this method also works with MyPhone Ocean Pro.

After releasing MyPhone's budget friendly android smartphones Agua Ocean Lite and Mini, many android fans has the great opportunity to grab an android handset in a very affordable price. I will never be surprised if there's too many users searching for a official discussion and tutorials for their respective MyPhone Ocean series device.

Before proceeding to this rooting guide, what an android owner must know is the risks that can possibly occur on tweaking your MyPhone device. Make sure you have the good brain to follow the instructions carefully and a patience to wait. Finally, read and understand what is rooting, pros and cons for you to be knowledgeable of the effects of rooting.

Guide How To Root MyPhone Agua Ocean Lite and Mini

In my perspective, I can suggest the 3 best methods to root your device. The methods below are my recommendations sorted by order (from easiest to easier) for rooting your device. If you have failed to root on the first method, try the second method. This methods are safe so you only have to worry is your MyPhone's warranty.

1 Rooting using Framaroot
2 Rooting using vRoot
3 Rooting using Root Genius

But the easiest method is using Framaroot. How? Proceed to this article on how to root your MyPhone Agua Ocean Lite, Mini in a very easy steps.




Credits to XDA