[ROM] Kitkat Update V.1 For MyPhone Infinity | MMX A350

Watch out for Infinity's Kitkat Update! From Micromax Canvas Knight

For those Infinity users who waited long for the turn on getting their phone's software upgrade, well, the much-awaited and much-unexpected surprise arrives. From the popular Micromax Canvas Knight A350, give way for MyPhone Infinity's Kitkat ROM update!

Getting Kitkat ROM on your MyPhone Infinity | MMX A350

Proceeding, you will learn how to finally get a android 4.4.2 Kitkat ROM upgrade on your MyPhone Infinity through getting it flashed from any custom recovery based on the popular Clockworkmod recovery and TWRP. Without further a do, here's the procedures below.

Kitkat update v.1 ROM Features:

• Based from official MTK 4.4.2 Kitkat ROM for MT6592 (A350)
• Fully Deodexed
• Init.d support
• YONIP Tweaks
• Pre-rooted

Notice From the Contributor:
"Before installing, Back up data and settings using a recommended custom recovery tool, like ClockworkMod (CWM) or TWRP, as it creates a complete image of the existing phone setup. In Recovery, choose Backup and Restore and tap Backup."


Installation: (Credits to Rymoj Serolf)

1. Make sure to get all the things needed.

2. Put "MyPhone_Infinity_Kitkat_V.1" on your Infinity's SD card.

3. Turn OFF your phone then boot to CWM Recovery or any other custom recovery using this keys (Press Power + Volume Down + Volume Up at the same time).

5. Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress)

6. Select Install Zip from sdcard and then click Choose zip from sdcard. Browse to the location of the Kitkat 4.4.2 update for MyPhone Infinity file which you copied earlier to your phone's SD card.

7. After Successful Installation, reboot phone, FIRST BOOT my take time, be patient :)


additional credits:

MMX A350 Kitkat Firmware, YONIP DEV TEAM, Sir Miyer C. Bernabe of YDT

Things needed: (Important)

• Rooted Infinity - root it here
• Custom Recovery such as CWM | TWRP - here's how
• Kitkat ROM - click here to download

MyPhone Agua Rio Color OS custom ROM on S5501

New custom ROM for MyPhone Agua Rio

Choosing proper mods and ROM for MyPhone Agua Rio has been a little bit confusing as the popular Rio came with so many build versions which causes too much complains on the users' side. But the least for the developers can do is make a mod that will guarantee its functionality on a specific Rio version that's why another custom ROM came to bring MyPhone Agua Rio another look.

From the popular Oppo OS, here comes Rio Color OS

If you were amazed with awesome interface of the famous Oppo OS, one of  MyPhone Agua Rio (S5501) users, Marion Benizano, found a way to port this on his android phone and finally released it to the Rio crowd. Getting excited? Here's the moment you've been waiting for Oppo Color OS fans.

MyPhone Agua Rio Color OS custom ROM on S5501

Following the guide below will assist you to get MyPhone Agua Rio Color OS ported from OPPO on your beloved android smartphone. Comply the things necessary for the installation and carefully follow the instructions.

Warning! Flash at your own risk.

Notes from the porter:
Please respect this post..

The popular OPPO OS is now in our MyPhone Rio. Introducing Rio Color OS..
 This is base on Oppo R1 rom.. And Ported to Rio New Versions S5501..(Not yet tested in Old versions)..

Downloadable Themes, Wallpapers, Lock-screen and many more.
Working all Gestures and Motion Except for the Off-screen gestures.
Wifi and Blootooth working perfectly.
Completely compatible with rio repartition tool.

Things you need:

• MyPhone Agua Rio S5501 unit
• Rooted - visit here to root
• TWRP or CWM Recovery - visit here to get custom recovery
• RioColorOS ROM - download here

Installation:

1. Download and RioColorOS_by_Marion.zip and put it to your Rio's SD card.

2. Boot to custom recovery. (CWM/TWRP)

3. Backup your phone. If you don't know how, here's how to backup on CWM or TWRP.

4. Wipe data/factory reset, Wipe cache, Wipe dalvic cache.

5. Go to mounts and storage, format system.

4. Go to Install Zip from SD card.

5. Choose RioColorOS_by_Marion.zip and proceed to install.

6. Wait and reboot. Done!

Enjoy your new MyPhone Rio Color OS!

Additional Notice:
Take note of some ROM issues:

Key board is not working properly so you have to manually fix in settings.

1. Go to settings
2. General Tab
3. Language and Input
4. Choose Oppo Keyboard as Default

Internal Storage is not accessible in PC only External Storage will be detected.(may be because the phone where the original ROM came from has is non expandable.

Please leave a comment if you discover another bug in this ROM.

Tips:
To show the carrier icons like the one in the screenshots just go to Display tab and tap Carrier info then choose Show carrier icon.

You can add more Gesture under General tab > Gesture &motion.

Swipe down to the right to open the notification panel and swipe down to the left to open gesture panel.


credits:

Marion Frances Benizano, Google for sources and research, XDA for the Porting guide, Other rom Developer for the advice.

Cherry Mobile Omega Spectrum: Relight V Modified Stock ROM

Who wants enhanced native stock ROM on Omega Spectrum?

Like any other popular android smartphones, Cherry Mobile Omega Spectrum has been experiencing further customization and tweaks. Having an OEM device is just an awesome advantage. But for those who are tired of the custom ROM and want to try or go back to the original, factory, stock ROM, then, this enhanced or should a I say a more improved Stock ROM for Omega Spectrum.

Relight V ROM, stock ROM for Omega Spectrum with custom ROM features

Just a relief for those who seek for a more stable, bug-free ROM, this Custom Relight stock ROM will let you experience the tweaked performance and highly-customizable features from which being boasted by any other custom ROM available. Want to try it out? Just feel free to have it your way.

How to get Relight V ROM installed on your Cherry Mobile Omega Spectrum

Proceeding below will let you flash the Custom Relight Stock ROM on your Cherry Mobile Omega Spectrum. With the great help of the S5J devs, the contributor of the ROM, we have put up all the steps and made it easier and more informative for you to make it work on your phone.

Disclaimer: Do the flashing at your own risk. We are not responsible for any possible issues it may cause. We are just here to help you.

Features:

• Stock Interface
• Deodexed
• Tweaks added
• Fixed previous stock issues
• Zipaligned
• Busybox
• Inid.d supported

Things you need:

• Rooted Omega Spectrum - Here's how to root
• CWM recovery - Don't have it? Follow this guide
• Relight V ROM by A_Aziz - Download here

Installation:

• Download the ROM "Relight_V_S5J-by-A_Aziz.zip" and put file on the root of your phone's SD card.
• Boot to CWM recovery mode.
• (Optional) Make a backup first if you don't have one. Follow this guide how.
• Wipe data/factory reset, Wipe cache, Wipe dalvic cache
• Go to mounts and Format System
• Go to Install Zip from SD card
• Select Relight_V_S5J-by-A_Aziz.zip and confirm to install.
• Wait for the installation to be completed
• Reboot system and it's done.

Enjoy the Relight V Modified Stock ROM on your Omega Spectrum!

credits to: advan s5j group, A_Aziz, Modder Anonymous


Feel free to leave your feedback. Furthermore, share us your screenshots. Thanks!

LeWa OS V5 Custom ROM Port For MyPhone Ocean Pro

New custom ROM present for MyPhone Ocean Pro

MyPhone Ocean Pro was not withheld from having awesome customization just like what the other android smartphones had. In fact, we have successfully rooted this device from which we have gained administrator rights with our device, next, ported a custom recovery in it that allows flashing most of the mods easily.

LeWa OS V5 custom ROM ported to MyPhone Ocean Pro

This new treat will be the custom ROM named LeWa OS V5, another one of the most popular ROMs present in the android development world, ported to MyPhone Ocean Pro. If you have aimed from getting a taste of a iOS-like or MIUI look-alike interface with fast and speedy performance, this one will surely bring you a hit of it.

Here's how to install LeWa OS V5 ROM on your MyPhone Ocean Pro

Without further babbling, here's how to flash LeWa OS on your MyPhone Ocean Pro. The steps are made to successfully flash the custom ROM with lesser or no problems at all. Please carefully read and follow the instructions.

Features:

• LeWa UI
• LeWa launcher ( MIUI Look alike )  
• Clean port, No tweaks added
• Rooted
• Zipaligned
• Storage Swapped

Bugs:

• None, Report to the ROM creator Christoper Infante

Instructions:

• Requirements:
• Rooted - Follow this guide how to root
• TWRP/CWM recovery- Don't have one? Here's how to get it
• LeWa OS V5 ROM - Click here to download
• GApps (Google Play Store) - Click to download

• Installation:
• Download the ROM (Lewa_Ocean_Pro.zip) and GApps (gapps-jb-20130812-signed.zip) and put the 2 files on your phone's SD card.
• Boot to TWRP / CWM recovery mode.
• (Optional) If you don't have any backup ROM, do a backup first. Follow this guide how.
• Wipe data/factory reset, Wipe cache, Wipe dalvic cache
• Go to mounts and Format System
• Go to Install Zip from SD card
• Find and choose the Lewa_Ocean_Pro.zip and proceed to install
• Wait for the ROM installation to be completed
• Again, go to Install Zip from SD card
• Find and choose gapps-jb-20130812-signed.zip and proceed to install
• Wait until it is done
• Reboot.
• Done

• Fixing Boot Loop:
• Wipe cache, Wipe dalvic cache, Fix permission and reboot.

Credits:

• Thanks to Christoper Infante for the ROM

AOSP Turbo Edition, Lightest ROM For Cherry Mobile Flare S2

Another special edition custom ROM arrives on Cherry Mobile Flare S2

When Xolo Q700S firmware came to give the development of Cherry Mobile Flare S2 a hand, it offered a sudden increase of success possibilities for the tweaks to work well on the said device. That's is why having an OEM version of the smartphone with a lot of developers is a great advantage, Cherry Mobile Flare S2 is a great example.

For those Cherry Mobile Flare S2 users who just want to experience fast gaming and snappy multitasking, the custom ROM you have been waiting for has arrived. The Xolo-Based AOSP Turbo Edition flaunts the Lightest custom ROM which only amounts 151.1 MB (awesome!) available for Cherry Mobile Flare S2 having a Xolo Q700S firmware. This special edition custom ROM is another reason for Cherry Mobile Flare S2 users to modify their smartphone, so if you are one of them, continue with the installation process below.

How to get flashed Xolo-based AOSP Turbo Edition, Lightest ROM on Cherry Mobile Flare S2 with Xolo Q700s firmware?

Following the article will help you get AOSP Turbo Edition ROM installed in your Flare S2. Be sure to carefully follow what is asked and what is instructed before messing up with your device.

Disclaimer: Flashed the presented custom ROM at your own risk. Following the guide is your choice therefore, it is your full responsibility for whatever your device might came up.

Note from the developer:

This is my 1st ROM port :D

• Flare S2 must be upgraded to "XOLO FIRMWARE" don't proceed if you have FS2/Stock Firmware
• Read all info before asking
• Respect the work
• You can report bugs in a nice way

Features:

• AOSP Look and Feel
• Debloated
• 210 DPI
• Trebuchet Launcher
• Minimal RAM usage (good for gamers)
• 4.3 Ported Camera, no force close
• DSP Manager
• Superuser by Koush
• Minimal GApps
• cLock(CM10.1 clock and weather widget)
• CM10.1 Mms.apk
• CyanogenMod
• Torch
• Integrated Perfomance Control app
• CyanogenMod Calculator
• Cherryness Removed
• Google Play Edition boot and shutdown animation
• Google Play Music as default music player
• ADB Insecure

Tweaks:

• Zipaligned
• SQLite optimization
• build.prop tweaks
• Automatic RAM Booster/Flusher
• Internet speed tweak
• sHaveged entropy generator
• Loopy smoothness tweak

Integrated apps on Settings:

• Greenify
• Xposed Installer
• GravityBox
• Battery Calibration
• Terminal Emulator
• Superuser
• Perfomance Control 

Tips and Tricks:

• Boost your RAM via Terminal Emulator, open Terminal Emulator, type su -c boost. Wait until it's finished. Enjoy the boost. 

Enable RAM Swap:

• Open Terminal Emulator. Type su -c rak. Wait until the process is finished. Close Terminal Emulator. Enjoy the blazing speed! 

Turn off RAM Swap:

• Open Terminal Emulator. Type su -c off. Wait for the process. Close Terminal Emulator. 

Download Link:

• [ROM] [Xolo Based] AOSP Turbo Edition Lightest ROM [151.1MB] (download the 2 files)

Requirements:

• Rooted Flare S2 - visit here on how to root
• Cherry Mobile Flare S2 converted to Xolo Q700s - follow this guide (IMPORTANT OR ELSE MAY BRICK YOUR DEVICE)
• CWM recovery- get it here
• AOSP Turbo Edition ROM (download the 2 files, ROM and the Patch)

Installation:

• Download the files and put the files to the root of Flare S2 phone SD card.
• Boot to CWM recovery mode.
• Optional (Make a backup of your ROM if you don't have one. Follow this guide.)
• Wipe data/factory reset, Wipe cache, Wipe dalvic cache
• Go to Install Zip from SD card
• Choose AOSP Turbo Edition.zip and proceed to install and wait until it's completed
• Once done, do Wipe data/factory reset
• Again, go to Install Zip from SD card
• Select Storage-CameraFC-FIXED.zip and proceed to install and wait until it's completed
• When done, reboot the system.

Camera Fix: Try to use Stock Camera from Xolo, or download 3rd-Party apps from Google Play Store.

credits:

XDA-developer, Alkane Mallari, Kards Le Sharpeye, Xolo Groups, Sa nagbabayad ng kuryente namin & to all who help me (Reymar) to build this port rom :D

LeWa OS ROM For Cherry Mobile Flare S2 with Xolo Q700S Firmware

One of my favorite custom ROM, Lewa OS is available on your Cherry Mobile Flare S2 running Xolo Q700S Firmware.

If you're excited getting a custom ROM available for your Cherry Mobile Flare S2, well, here is my treat for you! But, it's not just it will simply work on Cherry Mobile Flare S2 because first, you need to upgrade your Flare S2 firmware with Xolo Q700S' firmware in order for that to work, otherwise, it will just damage your phone or brick it. Once you have started flashing this custom ROM, flashing other ROMs will be a lot easier.

I will be presenting you a tutorial on how to be able to get this Lewa OS custom ROM port flashed in your beloved Cherry Mobile Flare S2 with Xolo Q700s firmware. It is as simple as flashing other ROMs but just be sure that you complied all the requirements. Follow the guide below to get it started.

[ROM][PORT][Flare S2 with XOLO Q700S FW BASED] 

Lewa OS

Ported by John Reniel Caluag

Disclaimer: Do the flashing at your own risk. We are just here to help so don't blame us for any damage after flashing. Do enough research before messing up with your device.

FEATURES:

Common:

• Rooted
• Zipaligned
• Deodexed
• Busybox with init.d support
• Unsecure boot.img for ADB Access

Exclusive:

• Minimalistic
• Lots of customizations
• A little difference with MIUI
• More Optimized and Cleaned

ROM Download:

• [ROM][PORT] Lewa OS

Requirements:

• Rooted Flare S2 - here's how
• Cherry Mobile Flare S2 upgraded to Xolo Q700s - here's how (IMPORTANT!)
• CWM or TWRP - get here
• LeWa OS ROM

Optional:

• Backup your ROM on CWM recovery or TWRP

Installation: (Flash on TWRP or CWM ONLY!)

1. Download the ROM and put it to the root folder of your SD card.

2. Reboot your Flare S2 into recovery mode (Volume up + Power key) or use a rebooter app.

3. Wipe your data/factory reset, Wipe cache, Wipe dalvik cache (Important)

4. Then go to "Install Zip from sdcard"

5. Select LewaOS_Q820_060214.zip file.

6. Wait for the flashing process to complete.

7. Reboot the phone.

8. Enjoy.

Enjoy the new LeWa OS ROM on your Cherry Mobile Flare S2 having Xolo Q700S Firmware!

credits:

XDA Forums, Kards Sharpeye for xolo fw,cam fix, Google, Needrom, Allain Gem and John Reniel Caluag

How To Easily Backup/Restore ROM using TWRP

Basically after rooting any android device, it is always a recommendation flashing a custom recovery to immediately create a backup of your phone or tablet's currently working ROM, from there you will be choosing only one custom recovery to replace your device's stock recovery. On that case, you'll be choosing either of the two mostly-used custom recoveries naming, the popular ClockworkMod (CWM) recovery and Team Win Recovery Project (TWRP).

Why use TWRP?

TWRP is simply a custom recovery created to make tasks, installation of ROM and flashing mods easier and more convenient. TWRP includes backup and restore, partitioning, and all other advance features that the native stock recovery doesn't have

Both CWMR and TWRP are essentially the same when it comes to functionality however, TWRP has an advantage from its touch supported interface from which any user can use it easily (newbie friendly). So whenever TWRP is compatible with your device, get it to your device as soon and as early as possible.

How to easily backup ROM using TWRP on any Android

Getting a ROM backup from TWRP, also known as nadroid backup through TWRP, is just as easier as from what you have thought of. Below are the steps, so better familiarize it.

Requirements:

• Root Access - your device must have root access in order to access and backup the whole ROM. Follow this guide how to root
• TWRP already installed - of course you must have TWRP recovery in your android device. You might try this guide to get TWRP installed in your device but not all android devices are compatible. If your device is not supported, get a port or request from a developer for a TWRP which is compatible with your device.
• Free storage space - you must have free storage space for your device to store the backup. The size depends on your ROM size so better have a bigger free storage space.
• At least 70% battery power - to make sure the device won't shutdown and interrupt the process.

Steps:

1. Reboot your android device to TWRP Recovery mode. (You can use 3rd party apps such as Holo Reboot to easily reboot to recovery, otherwise, use the combination keys which varies from device to device.)

2. Once in TWRP already, choose Backup.

3. Mark Boot, Data, and System. You only need that 3 partitions to be safer.

4. Optional, you can rename or choose what storage the backup will be stored but just make sure you have enough storage space.

5. When all are set, select Backup to start backing up the ROM.

6. Once done, select Reboot System to reboot your device normally. You can check and copy the backup folder to somewhere safer (like making a copy on your computer).

Restoring the ROM backup

Requirements: Same as from making a backup but make sure that the backup is on your storage.

Steps:

1. Reboot your rooted android device with TWRP in Recovery mode. 

2. Once in TWRP already, choose Restore.

3. Find and select the Backup folder you made from TWRP previously (must be TWRP flashable backup)

4. Once done, Reboot the system and you are back from the previous ROM you had.

Credits to XDA, TeamW.in

Cherry Mobile Flare S2 : Root | Recovery | ROM

Got the newest Cherry Mobile Flare S2?

Flare, after gaining its success as the most competitive Quad-Core android smartphone in the previous year, Cherry Mobile takes out Flare S2 as their new entry for the most affordable Quad-Core, camera phone in the country.

Cherry Mobile Flare S2 Development Tutorials

While waiting for the one to share an already finished work, why not try it out of our own? So today, we will help each other to contribute for the development of Cherry Mobile Flare S2.

This article will be discussing and will seek the ways to improve Cherry Mobile Flare S2 experience. We will know how to root, flash custom recovery such as CWM and to provide ROMs applicable for the said device, Flare S2.

First, getting a backup for Cherry Mobile Flare S2

Before trying anything you are not familiar with, make sure to always prepare for a backup just in case something wrong will happen, you can restore the previous working state of your device software. Backup fixes almost all android problems so that is why I am recommending you to do it first.

Follow this guide on how to get a backup of your Flare S2

How to root Cherry Mobile Flare S2?

If you have reviewed the specifications of Flare S2, you will find out that this smartphone was equipped with Mediatek (MTK) chipset, MT6582 to be specific. I've written few articles on developing MTK-based devices and we can actually use that for developing Flare S2 as well.

What is rooting?

For rooting, one of the most popular apps we can use is Framaroot, a one-click android app for rooting. However, there are such devices which can't easily get rooted so I have an alternative solution whenever rooting from Framaroot doesn't work by using a computer app such as vRoot, Kingo, and Root Genius.

My recommendations to root Flare S2:

1. Use Framaroot

2. If Framaroot doesn't work, use vRoot or Kingo.

• Here is the rooting guide for all methods.

Next, how to flash custom recovery on Flare S2

What's always next to rooting is flashing custom recovery for backing up your device easily also for flashing mods most especially for installing ROMs. Luckily, Cherry Mobile Flare S2 is a Mediatek-based smartphone, it will be easier to port CWM recovery in no time.

Flashing ClockworkMod (CWM) Recovery

CWM recovery is the most popular custom recovery nowadays that's why I suggest you'll install it in your Flare S2 ASAP. Let's get it flashed then by just visiting my separate article:

• how to flash CWM recovery on Flare S2.

ROMs available for Cherry Mobile Flare S2

ROMs is capable of bringing android devices a new taste and performance from which users are ever wanting. It can dramatically increase the overall performance however, may degrade your device's life so better use it wisely and knowledgeably.

Read more about ROMs..

Cherry Mobile Flare S2 Stock ROMs

As of this moment, no users have contributed their Stock ROM. But hey, you can create your own by just referring to this article how to make your own stock ROM.

Update!

Here's a Stock ROM available for Cherry Mobile Flare S2! Please follow well the instructions below.

• Cherry Mobile Flare S2 Stock ROM

Cherry Mobile Flare S2 upgraded to Xolo Q700S (Needed for Custom ROM)

This is how to upgrade the firmware of Flare S2 into Xolo Q700s that will allow flashing custom ROMs. If you don't want custom ROM, then, skip this.

• How to upgrade Cherry Mobile Flare S2 to Xolo q700s Firmware

Custom ROM for Cherry Mobile Flare S2 running Xolo Q700S Firmware

The only means to get custom ROM on your Flare S2 is to convert or upgrade it to Xolo Q700s, after that, you can now enjoy all available ROMs that made for Xolo Q700s and flash it to your Flare S2.

• Find ROMs available for Cherry Mobile Flare S2 running Xolo Q700S Firmware

Custom ROM for MyPhone Agua RIO

Switch your MyPhone Agua Rio looks!

Finally, custom ROM available for MyPhone Agua Rio! This will be the much-awaited opportunity for MyPhone Agua Rio users to take their loved device out of the box and have another taste and experience the performance of the most popular smartphone looks present in the android smartphone industry.

I will not prolong your excitement because on this article, I will be presenting you the collection of awesome Custom ROMs available for your adored MyPhone Agua RIO. Thanks to our very own Pinoy devs/contributors, naming Edmhar Laoag, Xenon Lacdang, Red, Abdul Tarim and John Reniel Caluag, for providing their knowledge and works for MyPhone Agua Rio development.

Disclaimer: Flash at your own risk. We, including the developers and the contributors, are not liable for any damage it will cause to your device.

Preparation:

• Backup your ROM, follow this guide how to backup.
• Backup your files in your internal and external storage to computer or somewhere safe. ROMs with swapped features formats your internal/external storage.
• Charge for phone at least 70% to avoid interruptions.
• Download the ROMs below which suits your RIO model and put it to your storage.
• ONLY Flash the ROMs in CWM / TWRP recovery, NEVER flash in Stock recovery. Here's how to flash CWM / TWRP recovery in your RIO.

How to flash custom ROMs in MyPhone Agua RIO?

Flashing on TWRP:

1. Place the downloaded custom ROM in your RIO's storage
1. BACKUP
2. Reboot to TWRP.
3. Wipe Data/Factory Reset
4. Advanced options - /Wipe Dalvik/Cache/System/Data
5. Install Sample_ROM_.zip (depends on the ROM name) and wait until it's done.

• If the ROM has a patch/add-on, Install Sample_Patch_Add-on.zip (depends on the patch name).

7. Reboot System
8. Wait and enjoy!

Flashing on ClockworkMod Recovery:

1. Place the downloaded custom ROM in your RIO's storage.
2. Backup ROM if don't have one. Follow this guide how to backup.
3. Reboot to CWM Recovery
4. Wipe Data/factory reset, Wipe Cache Partition, go to advance, Wipe Dalvik Cache
5. Select Install Zip from SD card
6. Select Choose Zip from SD card
7. Choose "Sample_Rio_ROM.zip", depends on the ROM's file name.
8. Install
9. Wait until it's done.

• If the ROM has patch/add-on, flash it immediately after flashing the ROM. Select Choose Zip from SD card, choose "SamplePatchORAddon.zip", depends on the file name (gapps, etc..).

10. Reboot system now

Custom ROMs for MyPhone Agua RIO S5501

[S5501 ROM] MP RIO - MIUI v5 4.4.18

with Weekly OTA-Update plus Nokia X Keyboard

by: Edmhar Laoag

Description:

MyPhone Agua Rio MIUI v5 4.4.18  for S5501 Model Only. This rom  was ported from MIUI v5 for GFive A800 and supported by Ansuman Mahapatra ( helloansuman MIUI Profile HERE  of MIUI Official Developers so we can experience a weekly OTA update from MIUI.  OTA Updates will be released on every Saturday orSunday)

Features:

• Weekly OTA update
• NOKIA X Keyboard
• Extreme Scrolling
• Init.d supported
• Zipaligned
• Swap Storage
• No Tweaks
• Update to 4.4.25 via OTA

Bugs:

• Tell us

Download Link:

• [S5501 ROM] MP RIO - MIUI v5 4.4.18 - 282 Mb

NOTES:

• MIUI is already rooted. To control ROOT access, go to Security app and go to permission then enable ROOT Permission.
• Creating Xiaomi Account by email registration. Dont try to register using mobile number or else you'll get Php 80 prepaid load deducted to your mobile account.
• To change English language in some options in theme/wallpaper app, JUST Go to APPS > Themes > Clear Data.

How to OTA Update MIUI Version

To update better to use TWRP. If CWM go to install zip from SDcard - toggle signature - make it disabled - go to install from SDcard - select the downloaded_ROM.zip - flash the update then reboot system now  

FAQs:

• For beginners using MIUI, this will help: http://en.miui.com/forum.php?mod=viewthread&tid=17759&extra  

[RIO S5501 ROM] HTC Sense UI for Rio

by: Red

Features:

• Single Sim Only
• Deodexed
• ZipAligned
• NOT YET ROOTED - You can root it RIO here
• Swapped Storage
• Proximity Working
• Faster Auto Focus
• OTG WORKING, Use 3rd Party Apps Like RootExplorer, ES File Manager, etc.
• Screenshot, Press Power Button + Home Button

Bugs:

• Storage Info Bug

Download Link:

• [S5501 ROM] HTC Sense UI for Rio - 412.09 Mb

[RIO S5501 ROM] MyPhone RIO S4

by: Edmhar Laoag

Features:

• Air Gesture
• Build.Prop Tweaks
• Already Storage Swapped

Bugs:

• Tell us

Download Link:

• [RIO S5501 ROM] MyPhone RIO S4 - 222.12 Mb
• Patch:
• GAPPS (Google Apps) 
• English Factory Mode

NOTE: When flashing this ROM, be sure to select YES - FIX ROOT then continue to flash the patch.

[RIO S5501 ROM] Refined RIO X

Semi-thin ROM if based from Explay Fresh

Modded by Edmhar Laoag and Sir Lorenzo Manuel Gimoto

Features:

• Rooted
• Xperia Bootlogo-Boot animation-Some System icons
• Zipaligned
• Deodexed
• Busybox with init.d support
• Semi-Light ROM ( 22xmb like that)
• 3D Enhancer
• Performance Tweaks
• Better Ram Management 
• Disbaled Scrolling Cache
• Apollo with DSP Manager + (Beats Audio)
• Build.Prop Tweaks

Bugs:

• Tell us

Download links:

• [RIO S5501 ROM] Refined RIO X - 227.01 Mb

Custom ROMs for MyPhone Agua RIO S5500

[RIO S5500 ROM] Rio Sense v1.0

by: Xenon Lacdang

Features:

• Single Sim
• Sense UI
• ZipAligned
• Deodexed
• Init.d support
• Busybox
• Removed Bloatwares
• Pre-rooted
• Unsecured boot.img
• Better RAM Management
• Less Lag UI
• OTG WORKING
• Xperia Honami Keyboard
• Swapped Storage
• No Tweaks Added

Major Bugs:

• NONE

Minor Bugs:

• Offline Charging Animation

Download Link:

•  [S5500 ROM] Rio Sense v1.0 - 369 Mb

[RIO S5500 ROM] Samsung Galaxy S4 GT-S5500 v1.0

by: Xenon Lacdang 

Features:

• Samsung Galaxy S4 UI
• Dual Sim
• Air Gesture
• Smart Scroll
• Note 3 Lockscreen Ink Effect
• Viper4AndroidFx (Updated)
• Clean Port
• Zipaligned
• Fully Deodexed
• Busybox
• Init.d Support
• Pre-Rooted
• Unsecured boot.img
• Better RAM Management
• Less Lag UI
• OTG WORKING
• Xperia Honami Keyboard
• Swapped
• No Tweaks Added

Bugs:

• Storage Info
• LED Notification

Download Link:

• [S5500 ROM] Samsung Galaxy S4 GT-S5500 v1.0 -  212 Mb
• Patch:
• GApps Patch

FAQ:

1. Low Loudspeaker Volume?
Go to Engineer Mode -- Hardware Testing -- Audio -- LoudSpeaker Mode -- Type = Ring -- Value=144 -- Max Vol. = 160

2. Root Problem? Root again your device.
Root your MyPhone Agua RIO here.

Pending Screenshot...

[RIO S5500 ROM] [PORT] Samsung Galaxy S5 SM-G900 v1.0

by: Xenon Lacdang

Features:

• SINGLE SIM Only
• Samsung Galaxy S5 UI
• Air Gesture
• Fully Deodexed & Zipaligned
• Init.d support
• Busybox
• Pre-Rooted
• Better Ram Management
• Swapped

Bugs:

• OTG
• Storage Info
• LED Notification
• Proximity (Not all RIO experiences)

Download Link:

• [RIO S5500 ROM] [PORT] Samsung Galaxy S5 SM-G900 v1.0 - 393.94 Mb
• Patch:
• Patch Update

FAQ:

1. Camera shows only 1MP ?
 Go to camera settings and change the Preview size from "Full Screen" to "4:3".

2. Low Loudspeaker Volume?
Go to Engineer Mode -- Hardware Testing -- Audio -- LoudSpeaker Mode -- Type = Ring -- Value=144 -- Max Vol. = 160

[RIO S5500 ROM][PORT] Carpad T5 Remix

by: John Reniel Caluag

Common Features:

• Rooted
• Zipaligned
• Deodexed
• Busybox with init.d support
• Unsecure boot.img for ADB Access

Key Features:

• Air Gesture on Camera,Gallery
• 13MP Rear Cam (Fake)
• 3 icon packs (Launcher menu-appearance settings-choose)
• S4 lockscreen

Bugs:

• Proximity Sensor

Download Link:

• [RIO S5500 ROM][PORT] Carpad T5 Remix - 258.59 Mb

NOTE:

1. Booting for the first time after flashing this ROM takes time. It's normal so just wait for it.
2. Before taking benchmark test. you must reboot your RIO first. Make sure to set the Governor to default (Hotplug) if ever you changed it.
3. DO NOT USE OTHER BOOT.IMG or KERNEL
4. DO NOT USE OTHER TWEAKS OR PERFORMANCE ENHANCEMENTS FOR IT MAY CAUSE CONFLICT.

Pending Screenshot...

[RIO S5500 ROM][PORT] GalaxyBean I S5 Edition

by: John Reniel Caluag

Common Features: 

• Rooted
• Zipaligned
• Deodexed
• Busybox with init.d support
• Unsecure boot.img for ADB Access

Key Features:

• 99.9 % Galaxy S5 UI
• Single Sim Only
• Samsung Apps

Bugs:

• Air Gesture
• Force closes when holding Home button on apps drawer
• Proximity

FAQS:

1. Camera shows only 1MP ?
 Go to camera settings and change the Preview size from "Full Screen" to "4:3".

Download Link:
[RIO S5500 ROM][PORT] GalaxyBean I S5 Edition - 414 Mb

NOTE:

1. Booting for the first time after flashing this ROM takes time. It's normal so just wait for it.
2. Before taking benchmark test. you must reboot your RIO first. Make sure to set the Governor to default (Hotplug) if ever you changed it.
3. DO NOT USE OTHER BOOT.IMG or KERNEL
4. DO NOT USE OTHER TWEAKS OR PERFORMANCE ENHANCEMENTS FOR IT MAY CAUSE CONFLICT.

[RIO S5500 ROM] Lewa OS v5

by: Xenon Lacdang

Features:

• Based on v1.15 Kernel 
• Lewa OS UI
• Zippligned
• Clean Port
• Better RAM MANAGEMENT
• Unsecured boot.img
• Rooted
• Less Lag UI
• OTG Working
• No Tweaks added
• Xperia Honami Keyboard

Bugs:

• Tell us

Download Link:

• [RIO S5500 ROM] Lewa OS v5 - 327.84 Mb

[RIO S5500 ROM] Genesis AOSP Edition v1.0

by: Abdul Tarim

Feature Highlights:

• Based on 1.15
• Modified boot image to have init.d support
• Light (and fast?)
• Google PlayStore included
• Jellybean keyboard with Swipe
• Light tweaks
• Rooted (install your favorite superuser/superSU app)
• Stock camera app (not from MyPhone version)
• Not storage-swapped

Bugs / Notes:

• Voice unlock is disabled but still in settings, ignore it
• No gesture (app, for lesser monitoring = saves battery)

Download Link:

• [RIO S5500 ROM] Genesis AOSP Edition v1.0 - 168.98 Mb

IMPORTANT

It is always recommended to make a backup before doing anything in your phone. So make sure you do so. So that in case you need to bring your phone to service center or for whatever reason, you can restore it to stock/factory state configuration.

This is based on stock rom (1.15). This means that you CANNOT do a CWM or TWRP data backup of your Lewa or MIUI ROM and restore after flashing this rom. If you do, you might get into bootloop (flash another ROM to fix that). You can still try, but you may not be successful.


Credits to: XDA, NeedROM, MyPhone Rio groups, contributors/developers of the tools, those who contributed to the creators of the ROMs..